A good suspension system gives a vehicle a smooth, even ride while providing Kalispell drivers with good handling and control. But like any system on your Subaru, essential parts of the suspension system can wear out, leading to a lower ride quality and safety concerns. So it’s a good idea for Kalispell drivers to remember a diagnostic examination of their suspension system in their schedule of an essential preventive maintenance. Springs do most of the work of the suspension system. The most common types of springs are coil and leaf, but air springs and torsion bars are becoming more common. The body of the vehicle is “suspended” by the springs.

If springs were the only working component in your suspension system, however, you’d spend your travel time bouncing up and down like a bobblehead. That’s where your shocks come in. They keep the rebound, or bounciness, of the springs under control. Shocks also keep your tires on the road, which keeps the driver in control of the Subaru. Some vehicles have struts in their suspension system. Struts are a compact combination of springs and shocks. They do the same essential job but in a single package.

Shocks wear out gradually, so it can be difficult for Kalispell auto owners to notice when they need to be replaced. There’s no definitive point when a vehicle’s ride goes from smooth and controlled to a bit imprecise. To check if your shocks or struts are worn, you should first do a visual inspection on them. If they are leaking fluid, they need to be replaced.

There are other less obvious signs that your suspension system needs critical attention. For example, an uneven, cupping wear on your tires may indicate that your shocks are worn. If your vehicle feels “floaty” when you turn, or, in other words, you don’t feel that you have full control of the vehicle, you should check your shocks. Also, if the front end of your vehicle dips noticeably when you stop, it’s time for new shocks.

Your owner’s manual gives recommendations on how often the shocks should be checked, usually between 15,000 and 30,000 miles (24,000-50,000 km). If one of your shocks does need to be replaced, you should replace all four. This will keep your suspension even and ensure good handling of your vehicle. If you carry heavy loads, tow a trailer or drive on uneven Kalispell area terrain, you might also consider upgrading to a heavy-duty shock.

Regular shocks contain hydraulic fluid. The essential fluid helps them absorb the bumps or “shocks” of the road so the impact doesn’t transfer to the Subaru’s body. Premium shocks are filled with compressed nitrogen gas, which costs more but does a better job of controlling body motions. Regular shocks can develop air bubbles that reduce their effectiveness; the premium shocks don’t have this problem. So if you want higher handling performance, if you drive off-road around MT or if you just want added comfort, you should consider upgrading to premium shocks or struts.

Replacing struts can put your Subaru out of alignment, so an alignment check should always follow this type of repair. Talk to your professional and courteous technician at Loren’s Auto Repair in Kalispell.